F-One Kite Bandit 18

$2,129.00
Out of stock
NZ-wide delivery — rates at checkout
Genuine products — authorised NZ dealer
Secure payment — Stripe & Afterpay
Expert advice — 027 245 7540

About this product

Everywhere, anytime, in every condition

The new BANDIT puts the joy of riding at your fingertips. This BANDIT 18 delivers the same unmistakable sensations and versatility that have made it legendary, only now optimized and fine-tuned to put performance within every rider’s reach.

Our ambition was simple: to make every move easier and more natural for all riders in all conditions. By refining power management and depower capacity, we slightly reduced the riding speed to deliver more control and comfort.

Based on the design and success of our last BANDIT, this new edition inherits all its key strengths: Staggered Seams for a perfectly smooth profile and outstanding stability in the air, optimized fabric distribution for the ideal balance between performance and comfort, and its trustworthy Delta C-Shape. It also incorporates a new 160 g Dacron on the leading edge, which is stronger and more durable, to support its performance and ensure increased longevity.


As a result, this new BANDIT delivers consistent, controlled speed, direct and intuitive handling, and the most comfortable ride yet, even when conditions get demanding.


On the water, everything feels easier: choppy waters are smoother to navigate, edging becomes more natural, and jumps are more accessible. Power control in the high end is outstanding, allowing for longer sessions without feeling fatigued. The planing start is instantaneous, bar feel is precise without being tiring, and maneuverability is excellent, whether riding a twintip, surfing strapless, or trying your first kite loops.

From your first sessions to your most ambitious maneuvers, the BANDIT instantly gives you confidence and supports you as you progress.

FEATURES:

  • Controlled speed for greater comfort and control in all conditions
  • Smoother riding in choppy water and easier edging for jumping
  • Optimized power management for a comfortable, fatigue-free high end
  • Stability in all conditions
  • Total versatility from freeriding to strapless, all the way to your first kiteloops

PRODUCT PERFORMANCE:

  • Upwind 80%

  • Turning Radius 80%

  • Relaunch 100%

  • Drift 80%

  • Depowered Handling 80%

  • Unhooked Pop / Slack 70%

  • Sheet and Go 100%

  • Hangtime / Vertical Lift 70%

    TECHNOLOGIES:

    We have been designing kites since 1998 and wings since 2019. Over the years, we have learned that design and fabric choice are only part of what it takes to build a disturbance-free kite or wing. The key is to analyze and understand load tensions to better control our design and its behavior while flying. That is done through Sail Engineering, and it is an ongoing part of the development of our kites. Sail Engineering is the science of controlling our design and its behavior while flying.

    Our R&D team focuses on key elements such as load paths, panel layout, and fabric weight management in each area of the sail. These elements work together to maintain a smooth and consistent profile, contributing to efficiency, stability and sharp performance.

    Warp tension line

    Woven fabrics feature a longitudinal 0° yarn (Warp), and a transversal 90° yarn (Weft). Therefore, a fabric has great strength capacities if you apply tension at 0° or 90° along the yarns. But it will deform and stretch when tension is applied at, let’s say, 45°.

    Staggered seams

    Most of the kite’s back lines tension is distributed through the trailing-edge panels and seams. As seams are significantly stiffer than the fabric they join, they tend to strain under loads and therefore deform the profile.

    On select kite designs, the staggered seams break that line of tension by balancing the stiffness between seams and cloth, which helps distribute the load over a wider area and maintain the original shape even under high loads.

    Load control paneling / Radial cut

    When engineering the load control paneling, we make sure that fabrics panels are warp/weft oriented, meaning that the load path runs through the yarns. Fabric and seams are then in the best position to receive tensions and maintain the original kite shape.

    Fabric weight management

    We use different fabric weights and constructions depending on the requirements of each area of the sail. Sail Engineering allows us to control our shape and manage load tensions without relying on unnecessarily heavy fabrics. By optimizing where and how much material is used, we can reduce overall fabric weight while maintaining the necessary strength and durability.


    SIZES / PRICED FROM:

    • 6m / $2129.00
    • 7m / $2199.00
    • 8m / $2299.00
    • 9m / $2459.00
    • 10m / $2599.00
    • 12m / $2789.00
    • 14m / $2999.00



    Advice: Our team are passionate, experienced boardriders. We have a wealth of knowledge and expertise to share and we encourage you to ask for our advice and guidance. 

    Delivery: We offer discounted shipping to New Zealand (North and South Island). Quotes provided at checkout.

    Returns: Our mission is to ensure you are supplied with products that are suitable for their intended purpose. We will always do our best to accommodate genuine returns / exchanges, please see our Terms and Conditions for more information.